Extension prototype model sharing the configuration skills of silicone in CNC prototype design

extension prototype model share the configuration skills of silicone in CNC prototype design. In the process of prototype model design, silicone products are used more often, the characteristic of this product is that their silica gel viscosity is relatively thin, and it is easy to operate, there will be no deformation, and there will be no shrinkage, and it is relatively easy to carry out mold removal, also, the surface of the mold is very smooth and very good in terms of simulation effect. Generally speaking, silica gel is a liquid that can flow. The main component in it is silica gel, and there are still some curing agents. The general curing agent accounts for about 4%. For example, if the silica gel is taken at about one hundred grams, then the curing agent needs four grams, and then the curing agent is integrated into the silica gel. Do not stir well and evenly, so a complete silica gel is produced. It should be noted that the content ratio of silica gel and the content ratio of curing agent must be accurately measured on a very accurate balance or electronic scale, and the following local temperature conditions should also be well considered, generally, the ratio can be matched according to this ratio at about 25 degrees.

Shenzhen Tuowei Model Technologies Co., Ltd. guarantees to providing quality products and services.
Shenzhen Tuowei Model Technologies Co., Ltd. will become the destination store for customers, offering the convenience of multiple brands and channels, and providing a personal high touch shopping experience that helps create lifelong customer relationships.
Shenzhen Tuowei Model Technologies Co., Ltd. can assure you that we never compromise on our quality standards and are one of the best in the market at present.
Shenzhen Tuowei Model Technologies Co., Ltd. constantly discovers the demands of global market for developing a wide range of products applied in different use.