Shenzhen prototype factory share the application of dewaxing method and copy method in the production process of prototype model

The application of the dewaxing method and copy method shared by Shenzhen prototype factory in the production process of prototype model

for the prototype model, I believe most people will not be very strange. There are also two main techniques for making it:

first, dewaxing method.

This method mainly uses paraffin, and then produces a product model, then the designer stuck the paraffin stick on the model so that he could use his hand to mention'Pouring Rod' And then pour it into the carton box. 'Plaster paste'. After 20 minutes, put the carton into one hundred-degree boiled water for paper stripping. When the wax is all precipitated, let the prototype model dry. Through these steps, complete mold was made.

another process manufacturing technique for a prototype model is the copy method

we take the example of making a simple hand mold. The first is to paint thick on your hands first. 'Clean and clean' , And then apply the prepared gel to your own hands, so that it will be applied every 10 minutes or so, a total of 3 times. After 2 hours, you will be able to take off the prototype model and then pour it. When it is finally solidified, you can take off the mold. Then a complete prototype will be successful.

If you want to know more about the process flow of the prototype model, please always pay attention to our official website of the extension prototype model

The average consumer is always looking for ways to save money while finding out solutions, is designed for killing two birds with one stone, providing a perfect solution to advance cnc machining problems.
The expert engineers of Shenzhen Tuowei Model Technologies Co., Ltd. always develop with utmost precision so that all quality standards are met during the production. we are looking forward to becoming a trusted supplier of customers. visit us at Tuowei Model.
rapid prototyping equipment 3d lithography with cnc machining prototype service are used extensively in cnc machining prototype service.