rapid medical devices parts prototype buddha supplier

It is common that Steel Stainless Rapid Prototype and Aluminum Rapid Prototype are used widely among all the Metal Rapid Prototypes. Except that, Brass Rapid Prototype are also used frequently. Generally speaking, if you want to make prototype in Golden color , it is a good choice to make it with Copper/Brass, because of its own color and properties, you can save the process cost of painting and make your prototype looks luxury and upscale.

In two weeks ago, a new client found our company via internet and asked whether we could design and make a luxury base of Buddha statue. His case was below: he bought a luxury and upscale Buddha, but couldn’t find a fit base to locate it. So he wanted to find a substantial prototype manufacture through internet to customize a good prototype to set his Buddha statue on it.

Because the client hadn’t designed the 3d drawing before he found us, so he required us to do it and agreed to pay the extra design fee. We needed to know some specific sizes of Buddha so that we could make the fit base of Buddha prototype for him before designing. After he posted the Buddha to us, we began to measure and finished the design within two days. After he confirmed it, we proceeded to make the rapid prototype without delay.

The Brass base of Buddha statue were involved in three process which containing CNC machining, Polishing and Sand Blasting.

CNC machining: CNC machines move as a certain path under the instruction of program, cutting off the spare parts of material to obtain the rudiment of prototype.

Tuowei rapid medical devices parts prototype supplier-1

Polishing: there are some burrs and rough marks on the prototype surface after CNC machined, it needs to be hand-deburred by sandpaper to get the smooth surface.

Sand Blasting: spraying a layer of particular sands on the surface of prototype to reduce its roughness.

Tuowei rapid medical devices parts prototype supplier-2

The client was very satisfied upon received the base of Buddha prototype we made for him. he said if his friends around him need to make prototype, he will strongly recommend us to them.

o******p

Tuowei medical devices parts prototype shows a design work from our industries finest designers. With an advanced aluminum E-cap, it has better electrical conductivity

g******b

The application of the advanced technology has made Tuowei medical devices parts prototype more perfect on appearance. It has a maximum service life of over 50,000 hours

v******r

Tuowei medical devices parts prototype has a secured source of raw materials. It's been proved that the ultra-high voltage can reach 750V

n******w

The production errors of Tuowei medical devices parts prototype are greatly reduced. The electrolyte inside the product is not volatile, which contributes to relieving the pressure in the sealed environment

i******n

Tuowei medical devices parts prototype is created in line with the principle of 'Quality, Design, and Functions'. The product is well-known for its good heat dissipation

t******x

The design of this product is simple, intuitive and distinctive enough to help itself stand out among competing items on a shelf. It has the advantages of low loss and high overload capability

Product Message

*Name

Phone

*E-mail

*Content

Get in touch.

Dear,I will reply in 12 hours. All your message are protected!

Sitemap

Tuowei rapid medical devices parts prototype supplier