What are the reasons for the deformation of vacuum compound die prototype

The prototype compound mold is to prototype with a rapid prototyping machine or CNC, then use silica gel as a mold, inject silicone mold with castables, and then open the mold. However, in the process of compound mold, due to various reasons, some deformation of the prototype will occur, thus affecting the accuracy of the prototype. What factors will lead to deformation of the vacuum compound mold prototype?

1. The mold silicone was put into use before it was fully cured. Although the mold can generally be removed within a few hours after pouring the mold, the mold glue is fully cured for at least one week. If the time permits the phone, experienced people usually have to pour the mold after a month to take out the appearance and start using the mold.

2, the quality of the silicone of the mold used is too poor, or the shrinkage is too high or there are too many fillers (Reduce the cost of mold glue)The shrinkage rate of mold glue is 0. 1%, the average is about 3%, and the shrinkage rate of the poor mold glue is higher.

3. The vacuum compound mold prototype needs a high temperature when it is injected, while the silicone liquid is affected by heat expansion and cold contraction, at that time, the possible size was just right. Once it cooled down, there would be a shrinkage, much smaller than the actual size.

Most places have a few choices when it comes to rapid prototype and manufacturing affordable 3d printer distributors, but it can sometimes be difficult to find the right supplier for your needs. The quality of can you 3d print a 3d printer is critical to 3d printing and rapid prototyping.
Shenzhen Tuowei Model Technologies Co., Ltd. is one of China's biggest providers in the following categories of products: buy cnc, cnc rapid prototyping, professional 3d printing services,etc. We also welcome ODM and OEM orders, and offer the highest standards of service, the cheapest deals, and the best buying experience. Get to know us at Tuowei Model.
Shenzhen Tuowei Model Technologies Co., Ltd. has unique staffs who will serve you with their best ideas by affording you with high-quality service.
For optimal cnc machining prototype service, choose a high-quality injection molding cycle system and make sure a certified installer sets it up.
abs injection molding has a great positive reflects from our dear customers.