Get in touch.
Dear,I will reply in 12 hours. All your message are protected!
The prototype model has a difference in shape and structure when polishing. If the shape is not very special, when the surface layer is processed, there is not much difference between the finished product. When polishing, you can absorb the use of some coarse sandpaper to simply polish, and remove some of the thicker edges above for more detailed polishing. When the requirements of the product for the surface layer are different, the degree of polishing can be different. After the polishing is completed, and then spray some atomic ash, the advantage of this is that the original roughness of the product surface can be more obvious, and the problems existing in the product can be seen more clearly. In this way, when the correction is not too blind, targeted, until all the polishing processing of the product is completed.
The polishing process mainly has three major roles:
1. Enhance the adhesion of the coating: before spraying the new paint film, the old paint film layer after drying is generally polished, so there will be a phenomenon of smooth surface transition and poor adhesion, so, after polishing, the mechanical adhesion of the coating can be enhanced.
2. Substrate: for the substrate, it is mainly to remove burrs and oil stains on the surface of the substrate.
3. Scraping the putty surface: the general surface is rough and needs to be ground to obtain a relatively flat surface. Therefore, polishing can reduce the roughness of the surface of the workpiece.
polishing the prototype model is definitely not an extra task. It can effectively clean up the impurities on the substrate; In addition, if some materials are scraped over putty, most of the surfaces will be relatively rough. After polishing, it can make its surface smoother and reduce the roughness of the workpiece; Moreover, the material after polishing can make the coating better attached to it.
when producing a prototype product, be sure to polish the prototype model. After processing a component with a machine, it is difficult to avoid some edges or traces on it. When dealing with such problems, it needs to be solved manually. Under normal circumstances, polishing paste will be used for polishing, and sandpaper will also be used for polishing. In this process, the effect of polishing treatment can also be checked by spraying ash.
not only provides good products
extension model is a prototype manufacturer with more than ten years of experience, it also has more than ten years of experience in prototyping and sales. If you want a prototype with reliable quality and reasonable price. Then, the extension model is your best choice. The extension model does not only provide good products, but also intimate services and unexpected surprises ~!
24-hour customer service hotline: If you are interested or have questions about the Tuwei prototype factory, please click on the online customer service
On the left side of our page
However, what does injection moulding mean isn't the only producer in domestic, and many people feel that Shenzhen Tuowei Model Technologies Co., Ltd.'s service leaves much to be desired in terms of functionality and design.
For details on cnc conversion, see Shenzhen Tuowei Model Technologies Co., Ltd. at Tuowei Model.
Shenzhen Tuowei Model Technologies Co., Ltd.’s model also predicts (i) a positive effect of management on firm performance; (ii) a positive relationship between product market competition and average management quality (part of which stems from the larger covariance between management with firm size as competition strengthens); and (iii) a rise (fall) in the level (dispersion) of management with firm age.
Tuowei is designed to enhance your savings in terms of cost, energy and efforts.If you are interested in our stereolithography 3d printer rapid prototyping companies products, please contact us soon.