3d printing service bureau

2018-08- 16 11: 51 when developing a new bumper, if the prototype is not made and the direct mold opening is produced, the cost is very high. If this bumper is not popular in the market, it will bring huge losses to the enterprise. If it is serious, it will also cause the enterprise to close down. Therefore, a bumper prototype needs to be made before developing a new bumper product. since the...

2019-06- 01 17: 37 It is often seen that customers need to make structural prototype models in the process of product development and production, colleagues who have developed the demand extension model for these customers are also very familiar with it. The meeting discussed the improvement process plan for this test. There have been many achievements in 17 years. Customers also want to find suppliers...

2019-01- 10 11: 05 when a general enterprise develops an aluminum alloy product, it will design the drawings, according to the product drawings, the prototype model of aluminum alloy is made to verify, mainly to detect whether the design of the product is feasible, and to improve the design of the insufficient place. some time ago, one customer, Mr. Zhang, needs to make a prototype model of aluminum...

2018-11- 15 21: 34 Hello everyone, in the process of looking for a prototype supplier, you are thinking about which prototype factory is affordable, however, we must understand that cheap goods are not good. Colleagues also gave up the quality. Therefore, it is necessary to choose a reasonable cost-effective prototype factory for cooperation. is also the service requirement we have always wanted...

2018-11- 28 16: 26 The time quickly turned to find that it was almost December. In the previous months, there were many Tianjin prototypes, and the customers cooperated with us. The prototype was also very satisfactory to them. So we chose to cooperate with our factory for a long time. We are very happy. It has always been our goal to get customer recognition. Like a Tianjin prototype the previous day...

2019-02- 17 08: 23 some time ago, Miss Li in Chengdu searched through the Internet'Chengdu prototype factory' Contacted the extension model, Cao Gong received him in the relevant business, and Cao Gong learned in the communication that Miss Li had to do a large prototype size, so before I found several local prototype factories, I couldn't completely process the prototype. I heard my friend say...

2019-06- 11: 29 prototype is now the only way for each commodity industry, and it is especially important to find a formal prototype Enterprise. Then it's so troublesome to find a regular prototype factory, why do you want to make a prototype model? The reason why prototype enterprises are looking for prototypes is to check the appearance design the plan is reasonable to provide useful reference;...

The Wohlers Report, 3D printing and additive manufacturing Industry Status Report, is released every spring. Over the past few years, I have reported overall growth in the industry from this analysis. In fact, I did the same thing this year: Wohlers reported 2018: The 3D printer industry grew 21% to $7 billion. A large part of the growth is based on the \"service provider\" category-these companies...