Tuowei rapid silicone rapid prototyping manufacturer

Company Advantages
1. The design of Tuowei silicone rapid prototyping involves sophisticated electric knowledge. Its circuit, including main circuit, pilot circuit, and signal circuit are designed with as less as possible connecting wires. PMMA material makes plastic products clear and transparent
2. Due to its unparalleled advantages, the product has been widely demanded in the market. Prototype is made by CNC Milling,and the involved surface finishing including polishing, painting, the logo sticking
3. Excellent characteristics such as are obtained when using materials. The simulation of our products is good
4. silicone rapid prototyping has the advantages of low-price and simple-structure, so are particularly suit for . The surface of our prototypes is smooth and flat
5. silicone rapid prototyping excels due to its excellent properties of . We have professional QC team to strictly control quality of our products

Rubber is formed by Injection Modeling of Plastic. many people called them "RUBBER" as it fell soft under the normal temperature and no need to be vulcanized. In general plastic industry, The low proportion with low hardness materials called "Rubber". The advantage is anti- high temperature and strong elastic. Widely used in electronic, spin, auto-mobile and machining.

Based on the above advantage, Many clients need to make prototype by Rubber, when they developed new product they want to use the same feature of the real product instead of other material. Because the test will be more accurate. Now we will introduce a rubber keypress prototyping which we had made in the past successfully.

This rubber keypress prototyping was made by Vacuum casting which included 3 steps. 

1. To create a Master

Before vacuum casting we need to make some masters. The master often use ABS material and made by CNC machined. 

2. To make Silicone mould

After master prepared, we will make silicone mold by the master unit. After 8 hours to dry-up to cut off the mould and take out the master. Then the mould is ready.

3. To do the Vacuum Casting

Take some liquid rubber material into silicone mould until drying. Transparent silicone mould would be used for about 20 times.

(1) Using master of CNC machined ,SLA or 3D printing unit to make a injection gate.

(2) Using wooden plate to fix the master which is prepared for the modeling.

(3) Put the evacuated liquid material into silicone mould and make the mould in the silicone mould.

(4) Take the mould into oven to accelerate the solidification.

(5) Take out the master.

(6) according to the material of the prototype, put into the correct liquid to copy.

To make rubber keypress prototyping, we do realized that we can make it in a short time from the drawing transfer into real product. you can make a correct overall evaluation before create a molding by the prototyping service which can minimize the risk of the product before launch to the market. In the process of new product development and updated of product, prototype is an important and essential key.

Company Features
1. Tuowei has been successfully made the achievement of producing silicone rapid prototyping with its .
2. Shenzhen Tuowei Model Technologies Co., Ltd. always adheres to the scientific concept of development.
3. We put emphasis on sustainability practices in our business. For example, we introduce advanced technologies to deal with production waste to comply with environmental and emission norms.