Rapid prototyping maschine

In recent years, the application of prototype model has been favored by most customers, many companies in the development of new products before, will design a 3d drawings, so you can probably look at the effect. This time if the mold to produce, then the risk is also large, so the need to make prototype model. Through the prototype can be confirmed to the guests, check the design, or any defects and...

2019-04- 26 11: 00 when you develop a new product, you need to find a prototype manufacturer with better secrecy to make the prototype, because the customer is afraid that the product drawings will be leaked when the prototype model is made, it will be preempted by competitors. Therefore, when choosing a prototype manufacturing factory in Dongguan, it will consider whether the manufacturer is confidential...

2019-06- 19 10: 13 most customers care about the very price when looking for a quick prototype model factory, and the cost performance is naturally good, it can provide high-quality samples for enterprises and save costs. However, for prototype processing, it is not realized to make high-quality products at a low price, and high-quality products are closely related to the advanced equipment and...

2019-02- 21 10: 43 In the first two weeks or so, there was a Mr. Zhang from a small and medium-sized enterprise in Longhua, by searching the information of Longhua prototype factory on the Internet, we found the extension model. After they came to the Tuowei model, Huang Gong immediately entertained them. He told Huang Gong that they had found a prototype factory to do it, but when they opened the mold...

2018-11- 07 20: 26 Shenzhen is a place where the prototype industry started earlier, with no less than 1000 prototype companies, especially in Fuyong, there are countless prototype factories, large and small, so that customers do not know how to make choices. In many Fuyong prototypes, how to choose is good? The following is the old driver of the prototype industry--The extension model is for you...

2018-11- 24 01:44 Hello everyone, in the process of developing a robot into the market. The prototype supplier will be required to cooperate with each other. It is usually designed by robot engineers to complete 3D drawings. Hand in a manufacturer to solve the molding problem. It is used to consider whether the actual use effect is as expected. but there must be more or less deviations during this test...

2018-08- 17 16: 40 excited that I received the drawings sent by Mr. Wang at work today. This time, I want to customize the medical prototype, due to the strict accuracy requirements, CNC machining is adopted. Since it is the first cooperation, it is ready to do 3 sets first, and then carry out batch processing of mold opening after confirmation. extension model has considerable advantages in...

2018-11- 12 20: 19 many customers should want to find a supplier with high quality specialty, but have concerns about processing factors. So I chose some small factories, most of which are not good because of cheap goods. After the loss is not worth the money, find a regular company to do it. Why is this? Today, there is a customer who has found a prototype factory in Changsha. because there...