Stereolithography process

2018-08- 11 08: 58 when making a plastic prototype, many customers pay more attention to the price of the prototype and only want to make a cost-effective prototype at a lower price. Many prototype factories can also make prototypes at a low price, but the quality of the prototypes made is really not flattering, but some prototype factories are normal in price and have high precision and exquisite appearance...

2017-09- 01 22: 28 The prototype model is a mold that is often used in industrial design and production, at present, most of the prototype model manufacturers use the CNC machining center to realize the production. When making a prototype model, the following steps will be taken: 1. Programming. Programming is a step in prototype model making. Programmers will analyze the 3D data of the product...

2014-07- 10 11: 52 new process and new step design inspection of rapid prototyping of prototype model take mold manufacturing as an example, the traditional method is to process on the CNC machine according to the geometric shape, which is too risky for a complex mold with a value of 100,000 or even millions of yuan, any carelessness in the design reflected on the mold is an irreparable loss. The...

2019-08- 02 13: 41 Miss Fu of Dongguan city went to work with friends many times and talked about that the quality of her customized prototype model was not good at all, in the continuous improvement of product costs, my friend learned that she strongly recommended the extension model, so after that, Miss Fu naturally came to the extension prototype factory. because Miss Fu is a car accessory,...

2019-05- 07 11: 45 It has been several months since the prototype model manufacturing company learned a lot here during this time. Karar, a customer who made the deal during this time, is from Sweden. He was a customer who was followed up by one of my colleagues before. My colleagues quoted him several times before and did not cooperate successfully. I haven't contacted each other for two or three months...

At CES on last January, will, the former lead singer of Black-Eyed Peas. i. Am, now chief creative officer of 3D systems, a 3D printing company, laughs at a printer that can make objects from recycled plastic. Today, 3D systems officially announced the ekcycle Cube, a consumer 3D printer that uses filaments made up of recycled plastic bottles in part. It will be sold for $1,199 in the second half of 2014...

When French-Canadian explorers travel west through the prairie in the middle. 1700, they do not know that there is a huge hole in central Alberta. They tried to get over it, got tired of it, went back to Ontario and Quebec and labeled the West with 'les mauvaisres terres' or 'bad land. 'The land is not always that bad, though. Deep scars and aliens on towering muddy cliffsOnce a lush coastal plain....

Introduction to the world's first 3D printing fashion series [Photo: Modeclix]As high-Although 3D printing fashion sounds high-tech, it is not completely new to the fashion industry. In fact, it has been included in the collection of designers such as Iris van Herpen, Chanel and Noa Raviv. The problem so far is that the clothes look both complex and impressive and are not very wear-resistant. Until now...