Two major problems that often occur when prototype model silica gel is used and their solutions

two major problems that often occur when prototype model silica gel is used and their solutions

Shenzhen prototype factory is engaged in prototype model making over 11 years, especially when using the prototype model silica gel to make the product model, many problems are often encountered. The following Shenzhen tuowei model summarizes the problems of the common prototype model silica gel as follows:

1. What about the sticky mold appearing on the silicone of the prototype model?

Shenzhen prototype factory believes that there are two reasons for this situation:

one is because of the previous model (Product model) There is no reasonable treatment, so the mold should be treated before the mold is opened. For example, the surface of the mold is thick and dry or the mold is very complicated. It must be carefully polished and cleaned. Then brush the mold release agent evenly. Common mold release agents include Vaseline, detergent, liquid paraffin, etc. In actual operation, different mold release agents can be painted according to the material of the mold.

The second is to pour the curing agent into the mold if it is not evenly stirred. When it is removed, it is dry and dry.

2. What about uneven curing after curing the silicone mold of the prototype model?

Shenzhen prototype factory believes that this phenomenon is caused by:

1. The ratio of silica gel to curing agent is inaccurate and is not weighed as required;

2. After mixing the silicone with the curing agent, it is not carefully stirred evenly. This situation will cause the die to be scrapped and should be avoided as much as possible.

Technology is a foundational component of today's fast-paced business environment. Shenzhen Tuowei Model Technologies Co., Ltd. who are digital natives are especially equipped to harness technology's power to establish, promote and grow our businesses.
If you are interested in any of injection molding equipment, please feel free to contact us.
The success of pc polycarbonate of campaigns largely rides on how you market your company to the crowd.