The prototype of the robot is really not a simple thing

I used to think that prototype fuel injection is a very simple thing-- It is not that after the paint is adjusted, pick up the nozzle and spray it to the prototype, let each angle be covered by the paint, and then put the prototype in the oven to dry it. It was not until this afternoon that I personally participated in the process of injection of the robot prototype to understand that this is not a simple matter.

The course of the matter is as follows: During this time, due to too many orders, the production department was too busy to come, the leader asked the people in our network department to go to the fuel injection department to help. The people in our network Department are all focused on the overall situation, so they readily agreed.

into the fuel injection department, it is a few neatly arranged robot prototypes that have been sprayed with oil once, it's just that some places have to spray other colors of paint, so you need to cover the parts that you don't need to spray with adhesive paper and paper. At the beginning, the experienced old master gave us a demonstration of how to post it. The skillful technique was too fast to want it, and we were shocked.

The next step is to do it yourself. I thought it was very simple, when you get started, you find that it is not simple. Some places are curved, and the angle of bending is relatively large. You need to use small adhesive paper to paste it on the outer layer, make the adhesive paper coincide with the curved profile, and then part of the paper inside or large adhesive paper can be used. At the beginning of the post, our rookies did not overpost it, but the area of the post was too small. They always had to re-post it. After half an hour, they didn't even post a robot prototype. Later, I gradually experienced some experience, and I summoned my glasses to stick them. The speed was a little faster.

after passing this matter, it was discovered that the prototype fuel injection is not a simple activity. Only by special personnel can the efficiency be realized.

prototype parts manufacturing 3d plastic printing services is generally used to vacuum casting process in rapid prototyping.
Our mission is to operate the best specialty retail business in domestic, regardless of the product we sell. Because the product we sell is ponoko 3d printing, our aspirations must be consistent with the promise and the ideals of the volumes which line our manufacture.
There have been conclusive evidence on 's role in rapid prototyping companies and abs cnc machining.
Shenzhen Tuowei Model Technologies Co., Ltd. might focus its marketing efforts by highlighting its end product—improved technology and increased profits—not its producing methods.
There's the area of manufacturing nc lathe that's becoming very important. If you can create those things, you build this closed bond.