Five problems to be considered in prototype drawing board programming

Five problems that should be paid attention to in the drawing board of prototype Programming 1. First determine the material thickness direction of the number plate, clarify the reference piece, and then measure the sheet thickness to check whether the reference and material thickness given by the drawing are correct. Check the status of each process in the DL diagram, clarify the center line position of the punching board of each process, and avoid errors when the center line of the punching board between processes is inconsistent. 3. Measure the blank size of the processed castings, and determine the machining allowance according to the drawings and plates. 4. Note that when the blank allowance is insufficient, when the processing surface needs to be adjusted to the height size of the reference line, the relevant positive pad height dimensions must be relatively adjusted, and the positive value must be recorded. 5. Step distance of type surface finishing tool: outer surface parts: 0. Below 2mm, the inner surface of the product does not exceed 0. 4mm.

It isn't just about being on polycarbonate working temperature anymore–it's about maximizing the potential of the platform of manufacturing.
Exceed our customers’ expectations by being the leading provider of safe, responsive, value-added services in the screw machine products industry.
The manufacturing industry is changing fast, so, for Shenzhen Tuowei Model Technologies Co., Ltd., being able to pivot and adapt as the marketplace shifts is imperative.
Basically, you cannot have a prototype parts manufacturing without having the right cast steel. Since you are going to use it regularly, be sure to invest in one that has a high quality.
Diversifying is an excellent growth strategy, as it allows Tuowei to have multiple streams of income that can often fill seasonal voids and, of course, increase sales and profit margins.