Volunteers use 3D printers to create inexpensive prosthetics

New York: an online organization of more than 1,500 volunteers is using 3D printers to make fake hands or fingers for people around the world who need them.
This Sunday, this is called e-
NABLE will meet at John Hopkins Hospital in Baltimore to further achieve their goal of designing, printing and distributing inexpensive plastic prosthetic limbs, before the upcoming US Food and Drug Administration public forum on 3D printing of medical devices. e-
Jon Shure, a research scientist at the Rochester Institute of Technology\'s magic Research Center in New York (
Media, art, games, innovation and creativity)
The group\'s artificial limbs are made of tough plastic and the cost of making or repairing them is low, he said.
\"The cost of traditional artificial limbs may exceed $40,000 (RM130,602)
\"Our hands are better than them,\" Schull told Reuters Health Channel . \".
\"We live in a world where standard products are very expensive.
By contrast, we are using the power of thousands of volunteers to give them away. \" e-
NABLE\'s print hand costs less than $50 (RM163)
Made for volunteers who can use 3D printers, but they are not as complex as traditional prosthetic limbs.
They are open based. source, non-
Proprietary design, some of which were first developed in 2012. (
The group here provides the design documents for hands, fingers and arms. )
Dr. Albert Chi, trauma surgeon at Johns Hopkins University, said in a statement to Reuters Health that this collaborative design approach has the potential to improve the lives of millions of people around the world.
\"It\'s time to introduce these technologies and practices into mainstream medicine.
Quinn Cassidy, mother of five childrenyear-
Old man who received the email
He is an enthusiastic supporter of the organization.
My son Griffin likes him very much.
We also need to tighten the strings on our fingers before adjusting them.
When he put it on, he was immediately able to pick up a ball and throw it out with his left hand, something he had never done before, \"she told Reuters Health.
Chi helped Griffin get dressed with a fake hand.
The prosthesis also helps Griffin become more confident, says Cassidy, who likes to show the prosthesis to curious children.
\"He often wears it.
\"He really owns it,\" she said . \". \"It\'s glow-in-the-
It was dark, so he pulled people into the bathroom to show them.
When he put it on, I can see that he is a little proud to go.
Recommend e-Cassidy-
For the parents of other children facing limb differences, this is a limb that can be used, in part because they are more accessible and easy to use than traditional limbs.
We found no traditional bodies.
Electric prosthetic arm Griffin likes.
He won\'t wear it, and it\'s very expensive: even with good insurance, it\'s just co-insurance
The salary is $1,000 (RM3,265),\" she added.
\"We have promised $50 (RM163)
Provide 3D for another childprinted hand.
\"The growing Google network helps connect patients to local individuals or institutions that have access to 3D printers.
In particular, the group is interested in forming alliances with aid workers in war
Torn areas, disaster areas and poor communities require inexpensive and accessible prosthetic limbs.
Schull said he was surprised by the growing support of traditional prosthetic manufacturers.
Hanger and Dankmeyer are two leading traditional prosthetic companies.
They are helping to sponsor the meeting that was advertised as a meeting between the artificial limbs and the 3D printer.
On October 8 and 9, the US Food and Drug Administration will hold a public seminar on \"3D printing technology challenges and solutions\" for medical devices.
\"I have to believe they\'re all looking at what we\'re doing,\" Schull added . \".
\"The pictures of the children smiling are very striking.
I don\'t know if the FDA will refuse.
\"Robert Graboyes, another sponsor of the Sunday meeting and a senior fellow at the Mercatus Center at George Mason University in Virginia, said he believes the FDA should approve new innovations more quickly.
\"Are these new innovations allowed?
This is a big problem . \"
\"If nothing else, we have an outdated approval system. ” If e-
If NABLE starts selling their hands or makes them more complicated, they need to get FDA approval.
\"Outsiders, people outside the medical industry, are innovating faster than insiders,\" Graboyes said . \".
\"3D printing is just an example.
\"At the meeting on Sunday, prosthetic doctors and parents will learn how to print and assemble 3D printed prosthetic limbs on their own.
\"At the end of the day, children with different upper limbs will try new ones --
According to a statement from the email, donated 3D printing handheld devices provide feedback and guidance to attendees for the first time\"NABLE.
The FDA\'s statement is here. —